...
 
 
   
 
T E C H N I C A L .. S P E C I F I C A T I O N S
 
Engine Type: single-cylinder, two-stroke, liquid cooled. Cylinder in aluminium with gilnisil coating on the barrel. Lamellar intake with electronically controlled rave discharge valve (lamellar intake and piston-controlled exhaust)
Bore & stroke: 2.12in x 2.146in
Compression ratio: 14.5:1
Carburetor: dellorto VHSB 34 LD, oval section choke (dellorto PHBN 28 BD, circular section inlet)
Ignition: electronic
Start-up: electric
Generator: 12 V - 185 W
Lubrication: separate oil reservoir with volumetric, variable capacity pump
Gearbox: 6 speed
Primary transmission: toothed gearing
Clutch: multiple discs in oil bath
End transmission: chain
Frame: double, sloping beam in cast aluminium with thin-walled monocoque crossed-rib stiffening, completely polished
Suspension: front: inverted fork in high tensile steel, 40 mm, excursion 4.75"; rear: swing arm with two asymmetric arms, in cast aluminium with walled monocoque. Single hydraulic shock absorber, excursion 4.75"
Brakes: front: floating disc 121/2", caliper with four parallel pistons; rear: disc brake, 08 5/8"
Rims: light alloy, with spokes. front: 3.00 x 17"; rear: 4.00 x 17"
Tires: front: 110/70 x 17"; rear: 150/60 x 17"
Dimensions: 78.375" maximum length 24.25" maximum width, 44" maximum height wheel base 53" mm
Dry weight: 258 lbs.
Fuel tank capacity: 3.5 gal. (0.8 gal. reserve)
 
Technical specifications and colors are subject to change basis manufacturer's needs or local norms and requirements.
 
 

GMC || Model | Price | Contact
Models: Scarabeo 50, Gulliver 50, Classic 125, RX 125, RS 125, RS 250, Pegaso 2, Pegaso 3, Moto 6.5
All rights reserved Mah Sing Group Berhad 2000